Floor Care Professionals uses a 4 step process to revitalize your floor surfaces. This process not only restores your floors to their original beauty, it also guards your grout from staining and discoloring.

Step 1. A non-toxic cleaning solution is applied to the tile and grout lines and allowed to dwell for 10 to 20 minutes. The solution is then worked into the pores to loosen embedded dirt, grease, oils and other contaminants.

Step 2. Using a water temperature of 250 degrees and up to 1200psi of water pressure, we thoroughly wash, rinse, and extract the dirt, oils, and pollutant-laden water out of the pores of the tile and grout into our trucks recovery tank. This clean and efficient process is all fluid controlled so there is no over-spray of water or cleaning solution.

Step 3. Next we dry the floor using high speed air movers which take between 10-30 minutes. We are then able to inspect the floor to see the true condition of the grout and can tell at this point if there is any permanent staining or discoloration.

Step 4. After consulting with you as to the condition of the floor you now have the option of sealing which will help to protect them from future staining.(Nominal charge applies to sealing.)